Stage inspections and the QBCC Standards and Tolerances Guide
Builders must meet the guide when fixing work, but not all defects are a breach.
Greenbank 4124 · 22 October 2026
Fully licensed & accredited
-
Queensland Building & Construction Commission -
Australian Society of Building Consultants -
Strata Community Association -
Building Dispute Practitioners Society
In short: A Greenbank build had cracks that were fixed but did not meet the guide.
Why the guide matters
The QBCC Standards and Tolerances Guide sets the limits for workmanship. If the guide is not met, the work is not up to standard.
What the guide says
It lists specific measurements for cracking, waterproofing and finishes. The guide applies to all work, whether it is wet or dry.
What we found
We inspected a Greenbank home where cracks appeared on the plaster. The builder filled the cracks, but the joint was still wider than the guide allows.
How we report it
We measure the joint against the guide and note the difference. This provides a record of what was not done, even if the builder fixed the crack.
What to do
Ask the builder to refer to the guide and get the item rectified. A handover inspection is too late to change the standard.
Written by our local inspection team from work carried out in Greenbank. Licensed building practitioners.
